SAILTAB RETROFIT BUNDLE
Sailtab without ripping out the old system.
Keep your B&G, Raymarine, Tacktick, NMEA 0183 or NMEA 2000 setup. Sailtab reads the existing instrument data and brings it onto a modern screen.
How it works
Old sensors, new processor and screen.
NMEA 0183, SeaTalk1, NMEA 2000 and Micronet data flows through the Communicator into Sailtab.
Every system speaks a different protocol. The Communicator translates that data into a format Sailtab can read. Installation preserves the yacht's existing infrastructure — no sensors to remove.
Compatibility form
Let's see your yacht's current system.
We'll work out the right retrofit path based on brand, model, sensors and protocol.
Supported systems
Supported systems
No two yachts are the same. Adaptation depends on the existing sensors, processor and protocol.
B&G H3000 / H5000
Sensor base stays in place. Data flows to Sailtab over FastNet or the existing data output.
Tacktick T112 / T120 / T122 / Micronet
Data on the Micronet network comes into the system through the Sailtab Communicator.
Raymarine ST60+ / ST6000+ / SeaTalk1
SeaTalk1 data is brought into the Communicator. Sensors stay; the screen is modernised.
Garmin
Connects to Sailtab over NMEA 2000 or the existing data output.
NKE
NKE bus data is bridged into the Sailtab system.
Legacy NMEA 0183 systems
The Communicator reads NMEA 0183 data and brings it onto the Sailtab screen.
NMEA 2000 systems
Installation is faster on modern yachts. Data goes straight into the Sailtab system.
Simrad, legacy Furuno and custom systems
Reviewed via the form. Most legacy systems have a viable adaptation path.
Let's start the upgrade without ripping anything out.
Send your current system. We'll work out the cleanest integration path into Sailtab.
Go to Compatibility Form