Sailtab · Complete set
Your boat's brain and display.
In one system.
Sailtab processes your boat's sensor data on one processor (NMEA 2000; NMEA 0183 and SeaTalk with a retrofit), calculates true wind, VMG, polar targets and laylines, and shows the result on a display you can read in sunlight. It calibrates while you sail. Runs on boat power; switches on and off with the ignition.
01 / What's included
Four parts. One system.
Every component was chosen to work together. Sailtab isn't a collection of parts; it's one system.
- 01
Sailtab unit: processor and display
All the calculation happens on the device; the Sailtab software runs here. Updates arrive automatically when it goes online.
- 02
Communicator
Your boat's data link. It collects the data on the NMEA 2000 network and carries it to Sailtab and the boat network. On existing systems, it translates older protocols.
- 03
Mast-foot bracket
A marine-grade bracket that holds Sailtab at the mast foot. The cable route is planned with the installation.
- 04
Power and cable kit
Boat power and ignition connection, network cable and the cables needed for mounting.
02 / Technical
Built for the deck.
Sun, salt water, wet hands and vibration. Built to stay readable while racing and cruising.
Computing power on board
- True wind corrections: current, upwash, mast height, heel
- VMG, %POL, polar target, laylines
- Start screen
- Multiple displays show the same values
Readable in direct sunlight
- 10.1" panel, 1600 nits brightness
- Optically bonded glass with reduced reflections
- Readable with polarized sunglasses
- Touchscreen that works with wet hands and gloves
- Full dimming for night; brightness manual or automatic
Switches on and off with the boat
- 12 V and 24 V boat power
- Switches on with the ignition; switches off with a delay when the ignition is turned off
Talks to your boat's network
- NMEA 2000 (via Communicator)
- NMEA 0183 and SeaTalk (with a retrofit)
- Ethernet and Wi-Fi; wired and wireless together
- Multiple displays share the same data
Ready for salt water and the deck
- IP68 protection
- One-piece anodized aluminum housing
- −20 °C to +70 °C operating temperature
- Mast-foot and cockpit mounting
03 / Which package
Sensors on board? Core package. If not, full package.
| Included | Core packageIf you have sensors | Full packageSensors included |
|---|---|---|
| Sailtab unit (processor and display) | Included | Included |
| Communicator | Included | Included |
| Mast-foot bracket | Included | Included |
| Power and cable kit | Included | Included |
| Wind sensor | Not included | Included |
| Speed and depth sensor | Not included | Included |
| GPS and compass | Not included | Included |
| NMEA 2000 network kit (backbone cable, T-connectors, terminators) | Not included | Included |
| AIS, load cell, custom sensors | Not included | Optional |
- Compatibility requirement
- Core package: NMEA 2000 sensors on board (including SeaTalk NG and SimNet variants). Other protocols: retrofit assessment.
- Full package: Sensors included; configuration finalized for your boat.
04 / Quote
Tell us about your boat; we'll work out the installation.
Boat type, existing sensors, number of displays. We'll plan the rest together.
Get an installation quote for your boat